EN
EN-4
1.1 INTRODUCTION
DANGER:
Before using the machine, carefully read the
attached “
SAFETY WARNINGS FOR THE
FLOOR SCRUBBER DRYER
” manual.
2.1 GETTING TO KNOW
THE MACHINE (Fig. 1)
1) Guide handle.
2) Control console.
3) Squeegee activation lever.
4) Water supply tap.
5) Solution tank.
6) Tank cover.
7) Clean water filling opening.
8) Wheels.
9) Removable splash guard.
10) Brush.
11) Squeegee.
12) Recovery water drain hose.
13) Squeegee water aspiration hose.
14) Recovery water tank.
15) Clean water drain/level tube.
16) Electric connection plug.
17) Clean water filter.
18) Brush up/down pedal.
19) Brush rotation activation button.
20) Touch sensor for the start-up and rota-
tion of the brush.
3.1 UNPACKING (Figg. 1-2)
Once the packaging has been removed as
shown in the instructions on the packaging it-
self, check that the machine and all the com-
ponents supplied are intact.
If any evident damage is found, contact the
area agent and the carrier within 3 days of
receipt.
- Remove the bag (21) containing the ac-
cessories.
- Cut the strap (22).
- Remove the wooden blocks (23 and 24).
- Lift the brush flange (9) by pressing down
on the pedal (19) (see relative para-
Accessories
0.7 ø PPL brush
40.0003.00 POLY 0,7
Brush spray guard
24.0265.00 + 40.4003.00
Front rubber wiper element
39.0110.00
Rear rubber wiper element
39.0111.00
Water loading tube
30.0024.00
Cable extension 25m
34.0427.00
Optional accessories
0.9 ø PPL strong brush
40.0103.00 POLY 0,9
1.2 ø PPL brush
40.0303.00
1.2 ø tynex brush
40.0203.00
Set polyurethane rubbers
95.0055.00
Drive mechanism
40.1003.00
