Ghibli & Wirbel 18961210993, Use And Maintenance Manual

Page: 23 / 180

ENGLISH 5
be considereddecontaminated once theyhave exited from the danger zones and onceevery action
necessary to avoid that the dust is dispersed has been performed.
-
For class M and H, the machine must be thoroughly cleaned before leaving the contaminated zone and
transported.
-
It is necessary to guarantee an appropriate exchange of airin the room where the machine is used.
Please refer to the national standards.
-
ATTENTION: this machine is intended for dust aspiration only
3. APPLIANCE DEMOLITION
For environmental safeguard, proceed according to the local current. When the appliance is neither usable
nor repairable, proceed with the componentsdifferentiated disposal.
The electrical equipment cannot be disposed asan urban waste, but it is necessary to respect the separated
collection introduced by the specialrule for disposal of waste derived from electrical (dlg n 151 of the
25/7/05 -­‐ 2002/96/ CE -­‐ 2003/108/CE).
Electrical equipment is marked by a symbol bearinga crossed out wheeled bin. This symbol indicates that
the equipment has beenplaced on the market after 13august 2005 and that it must beseparately collected.
An inappropriate or abusive disposal of the equipment or a misuse of it, in consideration of the contained
substances and materials could cause damages to persons and to the environment. The disposal of
electrical waste which doesn’t complywith the current standardswill involve the application
administrativeand criminal sanction.
4. REFERENCE REGULATIONS
The appliance has been built in conformity with thecurrent Machinery Directive and in conformity with the
standards indicated in the “EC” declaration of conformity.
5. UNPACKING
Once the packaging has been removed following the indications in theinstructions on the packaging itself,
check the integrity of the appliance and of all of its supplied. If you encounter clear damages please
contactthe dealer or an authorized assistance centre.