Ghibli & Wirbel 13101710001, Use And Maintenance

Page: 14 / 20

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ITALIANO - 6
NOTE:
Clean the water level sensors regularly and
check the state of wear as described in the
relevant paragraph.
For appliances equipped with suitable acces-
sories:
- Release the levers (1 Fig. A) and remove
the entire head unit (2 Fig. B).
- Remove the fleece bag (4 Fig. C) if pre-
sent.
- Reassemble the entire head unit (2 Fig.
B) and secure it with the levers (1 Fig. A).
- Insert the sleeve (7 Fig. D) of the suc-
tion hose into the nozzle (8 Fig. D) on the
waste container.
To release the sleeve (7 Fig. D), turn it
slightly and pull it outwards.
- Connect the ergonomic handle by screw-
ing it on (11 Fig. E) to the flexible tube (10
Fig. E).
- Join the ergonomic handle (11 Fig. F) to
the extension (12 Fig. F).
- Join the two rigid extensions (12-13 Fig.
G).
- Attach the chosen accessory to the rigid
extension (13 Fig. H) (suction nozzle,
floor tool, etc. Fig. H).
USE OF THE APPLIANCE
- The device is fitted with wheels and can
be easily moved using the ergonomic
handle on the head or pushed using the
handle (22 Fig. K, optional).
- If included, loosen the knobs (23 Fig. L)
and turn the handle (22 Fig. K, optional),
then secure it in the desired position us-
ing the knobs (23 Fig. L).
- To lift the appliance, use the ergonomic
handle (24 Fig. K) on the head.
- To block the device, use the brake control
(25 Fig. M) on the castor wheels.
Starting the appliance as a dust suc-
tion or liquid suction device
- Insert the main plug (26 Fig. N) into the
electrical socket.
Main power switch (27 Fig. O)
- Turned to “ ”:
The socket for the electrical tool (17 Fig.
J) is undercurrent and the suction unit is
switched off.
- Turned to “ ”:
The suction unit is always started.
- Turned to “
”:
The suction unit is started when the tool
connected is started.
- Turned to “ ”:
When combined with the automated fil-
ter cleaning switch (28 Fig. O) on “ ON ”,
the intensive filter cleaning is started (3
blasts and maximum suction power).
When released, the main power switch
returns to “ ” or “ ”.
“NONSTOP VAC!” filter cleaning switch
(28 Fig. O)
The machine features a filter cleaning sys-
tem called “NONSTOP VAC!”. When started,
an automated cleaning cycle is run when op-
erating to ensure the best suction and filter-
ing performance.
- When turned to “ ON ” and combined
with the main power switch (27 Fig. O)
on “
” or “ ”, the automated fil-
ter cleaning system starts (3 blasts at the
start, then 1 blast every 12 sec.).
- When turned on “ OFF ”, the function is
disabled.
WARNING:
When the device is used as a wet vac-
uum cleaner, keep the filter cleaning
switch (28 Fig. O) on “ OFF ”.
Manuale 8050902 TOOL PRO WDA 40 P_1ed_06-2021.indd 6 Manuale 8050902 TOOL PRO WDA 40 P_1ed_06-2021.indd 6 29/06/2021 10:08:04 29/06/2021 10:08:04