46
ADJUSTING THE ACTUATORS
:
1.
Select the actuators you want to adjust (height, backrest, inclination of the seat
area, legrest) with the
R 2
pedal on the
right
part of the foot control.
To do this, press the
R 2
pedal repeatedly until the LED of the desired actuator
lights up on the central electronic part (s. fig. 10).
2.
Press pedals
L 1
or
L 2
on the
left
part of the foot control to extend or retract
the selected actuator (s. fig. 9). For the direction of movement, please see the
arrow symbols on the stickers of the foot control.
STORING A MEMORY POSITION
:
1.
Adjust the desired treatment position as usual.
2.
Press the
R 2
pedal of the
right
part of the foot control repeatedly until the
lower diode
of the central electronic part lights up (s. fig. 10).
3.
Press the
R 1
pedal to save the treatment position.
4.
Now select the corresponding memory buttons
L 1
(Memory 1) or
L 2
(Memory 2) on the
left
part of the foot control.
Press and hold the
L 1
or
L 2
pedals until an acoustic signal sounds.
5.
The adjusted treatment position is stored.
RECALLING A STORED MEMORY POSITION
:
Two memory positions can be recalled using the left part of the foot control.
1.
Press the
R 2
pedal of the
right
part of the foot control repeatedly until the
lower diode
of the central electronic part (s. fig. 10) lights up.
2.
Then press and hold the pedals
L 1
or
L 2
of the
left
part of the foot control
until the stored treatment position is reached.
Summary of Contents for MLW F1
Page 86: ...85...