29
1 / 2
Push buttons for the adjustment of the
WORK HEIGHT
3 / 4
Push buttons for the adjustment of the
BACKREST
5 / 6
Push buttons for the adjustment of the
INCLINATION OF THE
SEAT SECTION
(
KNEE BEND
)
WARNING!
Ensure that no parts of the body or items are between the
parts of the MLE while adjusting the treatment position. RISK OF
CRUSHING!
NOTICE!
For safety reasons, the MLE moves only while pressing a key of
the MCP. When you stop pressing, all moving-operation will stop
immediately.
10.2 Adjustment of the work height
❖
For the adjustment of the
WORK HEIGHT
press the corresponding pair of push
buttons (
1 /
2
) (s. fig. in chapter 10.1 M
ANUAL CONTROL PANEL
).
❖
The direction of movement (up or down) is indicated by the arrow-symbols.
❖
The horizontal
WORK HEIGHT
of the MLE
is adjustable from approx. 54 cm up
to approx.86 cm.
The
ENTRY HEIGHT
is the lowest position of the seat. At this height, your
customer has easy access to the MLE from the side.
➢
MLE: approx. 54 cm / seat in horizontal position
10.3 Adjustment of the backrest
❖
The inclination of the backrest can also be adjusted easily using the MCP.
❖
For the adjustment of the backrest press the corresponding pair of push buttons
(
3 / 4
) (s. fig. in chapter 10.1 M
ANUAL CONTROL PANEL
).
❖
The direction of movement (up or down) is indicated by the arrow-symbols.
WARNING!
Ensure that no parts of the body or items are between the
parts of the MLE while adjusting the treatment position. RISK OF
CRUSHING!
