Page 5
Pic 1: Nozzle
5.1 Adjust air ratio device
1)
Unscrew the control panel thus can see the adjust air ratio device from bottom view.
2)
Adjust the air ratio based on burner flame.
5.2 Replacing the nozzle of the pilot flame
1)
Place a 11-mm spanner on the pilot burner body to counterbalance torsional stress;
2)
With a 10-mm spanner, unscrew the nut fixing the thermocouple and remove the thermocouple;
3)
Unscrew the nut fixing the gas pipe and remove the pipe;
4)
Take the nozzle out of the pilot burner body and replace it with a suitable one (see "Table 2: burner
specifications");
5)
Refitting the spare part is a reversal of removal;
6)
It is not necessary to adjust primary air;
5.3 Functional check
1)
Start the appliance by following the
"Operating instructions"
;
2)
Check for leaks;
3)
Check for flame stability throughout the ON-OFF-ON control range;
4)
Check the lighting process along the main burner and check that flames are even;
5)
Check for proper operation of pilot flame;
6)
Check that flue gases come out of the corresponding pipes regularly;
7)
Check that there is a good inflow of fresh air.
6. Operating Instructions
6.1 Before using the appliance
6.1.1 Preparing the appliance for use
Before cooking food for the first time, we recommend cleaning the appliance thoroughly. Remove all packaging
materials and adhesive films from the appliance very carefully. Before cleaning the stainless steel parts, make
sure that the detergent you intend to use does not contain any abrasive substances and that it is suitable for
