INSTRUCTION & OPERATIONAL MANUAL
5
4.
If the pilot flame goes out when you release the knob, repeat the item 1 to 3
specified above.
5.
“Full Flame” can now be achieved by depressing and rotating the gas control
knob anti-clockwise to the position “
”. (Fig 2)
6.
Turn the knob clockwise to the position “
”. The burner shall extinguish
and the pilot shall remain alight.
7.
To turn off the appliance completely, turn the knob fully clockwise to the
position “
”.
NOTICE:
An unpleasant smell the very first time it is operated can be considered as
completely normal.
6.3 After-use care
6.3.1 Cleaning
Before cleaning, turn off the appliance, shut off gas supply upstream of it.
Routine cleaning
Cleaning the appliance thoroughly every day will keep it in perfect condition
and increase its lifetime. Clean the appliance with a damp cloth using water
and soap or detergents, provided that they are not acid or abrasive as discussed
further above. Such detergents should not even be used to wash the floor near
the appliance, as their fumes may deposit on the steel surfaces and damage
them.
Stains and abrasions on the steel surface
Scratches and dark stains may be smoothed or removed using stainless steel
wool pads or synthetic abrasive sponges, which should always be rubbed in the
same direction as the satin finish.
6.3.2 Periodic maintenance
Only qualified personnel are allowed to carry out service and maintenance
operations.
The following maintenance operations should be performed at least once a
year:
Checking for proper operation of all control and safety devices;
Checking burner combustion, i.e.:
1. ignition;
