Your freezer is built with a reversible door. You have the choice of either opening it from the left or the
right side. In order to reserve the opening direction of your door, please follow these simple
instructions:
Remove all goods out of your freezer. Tilt the freezer backwards. Secure the rear from sliding. Tape
the door to the cabinet to prevent from falling.
Note: The above figure shows that one bottom foot is on the base bracket (normal not), you
will have to remove this foot from base bracket before beginning. And install it back to the
base bracket after you complete it.
1.
Remove the 2 hexagonal screws from base bracket.
2.
Remove the pivot washer holding the bottom of the door.
3.
Separate the door from the cabinet and remove the pivot axle from the upper side of the door.
Remove and reinstall upper and lower axle inserts to opposite side.
4.
Install the pivot axle to opposite side.
5.
Re-attach the door to the cabinet and secure with tape.
6.
Attach the base bracket to the opposite side.
7.
Install the bottom pivot aligning with the lower pivot insert on the door. Attach the 2 hexagonal
screws to base bracket.
8.
Remove tape.
9.
As the unit was tilted, wait 24 hours before plugging it in.
Summary of Contents for BD-32
Page 10: ......
