Page
2 of 14
This product is intended for a maximum weight of
27kgs
and drawer load capacity
5kg
each.
Do not exceed this weight.
Due to the size of this product we recommend that is assembled in the room intended for use.
When you ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for
assembly
Unwrap all packaging materials and place the components on top of the carton box or not on a clean floor to
prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Tools not included.
DO NOT use power tools to construct this product.
DO NOT over tighten screw or bolts.
DO NOT use this product if parts are missing, damage or worn.
DO NOT stand or sit on this product.
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and soapy water. Do not use solvent based cleaners or detergents as they
can bleach or damage the product.
V1 3/19
We recommend the use of the wall safety bracket provided for safety reasons. N.B. Wall fixings suitable for a
solid wall are included although the wall plug provided may not be suitable for other type of walls such as hollow
walls. Fixings suitable for your wall type must be obtained separately..
If in doubt please consult a qualified trade person.
Warning:
Always ensure the area to be drilled is free from
hidden electrical wires, water and gas pipes.
It is essential that this unit is fixed to a wall with the fixings provided.
