Tools Required
Page 1 of 8
Colour: BROWN PU/SILVER CHENILLE
BALMORAL WINDOW SEAT ASSEMBLY INSTRUCTIONS
Thank you for purchasing the BALMORAL WINDOW SEAT.Please read the
instructions carefully to ensure safe operation of the product.
PLEASE READ this sheet prior to assembly to familiarise yourself with the
various stages of construction.
Carefully open the pack supplied and check the contents against the parts and
fittings check list.Do not destroy any of the packaging until you are certain that you
have all the necessary parts for the assembly.
CAUTION:There are small components used in the construction of this unit.These
loose items should be kept away from young children whilst assembling your unit to
avoid the danger of choking hazards.
Page 2 of 8
BALMORAL WINDOW SEAT ASSEMBLY INSTRUCTIONS
To clean wipe with a sponge with warm soapy water.Do not use solvent based cleaners
or detergents as they can bleach or damage the product.
Never use scourers,abrasives or chemical cleaners.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Do not use power tools to construct this product.
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not use this product if parts are missing, damaged or worn.
Do not stand on the product.
This product is intended for a maximum weight of 50 kg. Do not exceed this weight
Due to the size of this product we recommend that it is assembled in the room intended for use
When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a clean
floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included.
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
INFORMATION
WARNINGS
CARE INFORMATION
Page 3 of 8
BALMORAL WINDOW SEAT ASSEMBLY INSTRUCTIONS
Page 4 of 8
BALMORAL WINDOW SEAT ASSEMBLY INSTRUCTIONS
Parts
Flat Washer-5/16"
4
8
SCREW-5/16"x38
SCREW-3x19mm
Fixings (to scale)
8
28
Hardware list(Not to scale)
4mm Allen Key
HINGE
1
2
Size: 1365*450*660mm
Please check the pack contents before assembling the product. If any components are
missing, please contact your retailer. The fittings pack contains small items that should
be kept away from small children.
Parts
A
B
C
D
E
F
10
20
30
40
50
60
70
80
90
100
110
1
2
3
4
5
7
6
Page 1 of 4
Colour: SILVER CHENILLE/NATURAL CHENILLE
SANDRINGHAM 2 DRAWER OTTOMAN ASSEMBLY INSTRUCTIONS
Thank you for purchasing the SANDRINGHAM 2 DRAWER OTTOMAN.Please
read the instructions carefully to ensure safe operation of the product.
PLEASE READ this sheet prior to assembly to familiarise yourself with the
various stages of construction.
Carefully open the pack supplied and check the contents against the parts and
fittings check list.Do not destroy any of the packaging until you are certain that you
have all the necessary parts for the assembly.
CAUTION:There are small components used in the construction of this unit.These
loose items should be kept away from young children whilst assembling your unit to
avoid the danger of choking hazards.
Page 2 of 4
SANDRINGHAM 2 DRAWER OTTOMAN ASSEMBLY INSTRUCTIONS
To clean,wipe with a sponge with warm soapy water.Do not use solvent based
cleaners or detergents as they can bleach or damage the product.
Never use scourers,abrasives or chemical cleaners.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Do not use power tools to construct this product.
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not use this product if parts are missing, damaged or worn.
Do not stand on the product.
This product is intended for a maximum weight of 50 kg. Do not exceed this weight
Due to the size of this product we recommend that it is assembled in the room intended for use
When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a clean
floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included.
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
INFORMATION
WARNINGS
CARE INFORMATION
Page 3 of 4
Page 4 of 4
Size: 1010*410*490mm
Please check the pack contents before assembling the product. If any components are
missing, please contact yourretailer. The fittings pack contains small items that should be
kept away from small children.
Parts
1
2
3
5
4
4
4
4
6
7
PHILLIPS
SCREWDRIVER
(NOT SUPPLIED)
1
G
SANDRINGHAM 2 DRAWER OTTOMAN ASSEMBLY INSTRUCTIONS
SANDRINGHAM 2 DRAWER OTTOMAN ASSEMBLY INSTRUCTIONS
2
1
2
2
CABINET
1 OF 1
FEET
1 OF 1
4 PCS
1 PC
1
2
STEP 1
STEP 2
Parts
Required
Parts
Required
1.
CABINET
2.
FEET x 4
1
2
2
4
Fixings (to scale)
A
10
20
30
40
50
2
A
A
A
A
x 4
Page 1 of 4
Colour: HOPSACK GREY/HOPSACK GREAM
WINDSOR CUSHIONED OTTOMAN ASSEMBLY INSTRUCTIONS
Thank you for purchasing the WINDSOR CUSHIONED OTTOMAN.Please read
the instructions carefully to ensure safe operation of the product.
PLEASE READ this sheet prior to assembly to familiarise yourself with the
various stages of construction.
Carefully open the pack supplied and check the contents against the parts and
fittings check list.Do not destroy any of the packaging until you are certain that you
have all the necessary parts for the assembly.
CAUTION:There are small components used in the construction of this unit.These
loose items should be kept away from young children whilst assembling your unit to
avoid the danger of choking hazards.
Page 2 of 4
WINDSOR CUSHIONED OTTOMAN ASSEMBLY INSTRUCTIONS
To clean wipe with a sponge with warm soapy water.Do not use solvent based cleaners
or detergents as they can bleach or damage the product.
Never use scourers,abrasives or chemical cleaners.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Do not use power tools to construct this product.
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not use this product if parts are missing, damaged or worn.
Do not stand on the product.
This product is intended for a maximum weight of 50 kg. Do not exceed this weight
Due to the size of this product we recommend that it is assembled in the room intended for use
When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a clean
floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included.
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
INFORMATION
WARNINGS
CARE INFORMATION
Page 3 of 4
Page 4 of 4
Size: 1200*490*475mm
Please check the pack contents before assembling the product. If any components are
missing, please contact your retailer. The fittings pack contains small items that should
be kept away from small children.
Parts
WINDSOR CUSHIONED OTTOMAN ASSEMBLY INSTRUCTIONS
WINDSOR CUSHIONED OTTOMAN ASSEMBLY INSTRUCTIONS
1
Description:CABINET
Carton NO:1 OF 1
Description:FEET
Qty:4 PCS
Qty:1 PC
1
2
STEP 1
Parts
Required
Parts
Required
1.
CABINET
2.
FEET x 4
1
2
2
2
2
2
2
STEP 2
Carton NO:1 OF 1
Description:LEFT SIDE PANEL
Carton NO:1 OF 1
Qty:1 PC
Description:RIGHT SIDE PANEL
Carton NO:1 OF 1
Qty:1 PC
Description:FRONT PANEL
Carton NO:1 OF 1
Qty:1 PC
Description:FEET
Carton NO:1 OF 1
Qty:4 PCS
Description:BACK PANEL
Carton NO:1 OF 1
Qty:1 PC
Description:SEAT CUSHION
Carton NO:1 OF 1
Qty:1 PC
Description:BOTTOM PANEL
Carton NO:1 OF 1
Qty:1 PC
Ref
Dimensions
Qty
