Gfp 663TH
April 2021
32
17. Inserting Rewind Shafts
1.
Slide a cardboard core onto the rewind shaft, Fig. 17a.
2.
Set one end of the rewind shaft into the open side support bracket.
3.
Align the arrow and shaft tongue with the slot in the opposite side support bracket Fig. 17b.
4.
Rotate both
locking outer sleeves to the closed position on the support brackets, Fig.17c.
18. Feed Tray Safety Latch
1.
A Feed Tray Safety latch rotates freely with the feed tray, Fig 18a.
2.
Ensure latch is in the locked position whenever the feed tray is rotated to the up position, Fig.18b.
19. Removing the Press Roller Assembly
1.
Unscrew the knurled thumbscrews securing the left/right sides of the Press Roller Assembly,
Fig.19a.
2.
Lift off and remove Press Roller assembly, Fig 19b.
Safety Latch
Fig.17a
Fig.17b
Fig.17c
Fig.18a
Fig.18b
Fig.19a
Fig.19b
