Gfp 663TH
April 2021
10
8B. Remove the Accessories
1. Remove plastic cover, accessory boxes, toolbox and Operator’s Manual.
9. Additional Installation Items
1.
Remove the shipping blocks and wire ties from the ends of the rollers before
attempting to raise the top roller!
2.
Slide the Control Panel boom into the receptacle and tighten the knurled locking collar, Fig. 9a.
NOTE:
Make sure the Control Panel is facing the front of the laminator before inserting the
boom and tightening the locking collar.
3. Install the foot pedal, Fig. 9b.
4. Check drive chains for tightness.
5. Check all drive set screws for tightness.
6. Check all electrical connections and input power and test for proper operation.
1
Control Panel Boom
Control Panel
Receptacle
Boom Locking Collar
Fig. 9a
Foot Pedal Receptacle
Fig. 9b
