Gfp 563TH-4
December 2019
14
10F. Align machine to stand
1.
Screw one Alignment bolt through the alignment bracket into machine frame on the
outside
of each stand leg.
Note: You may need to slide machine to align holes in machine frame with machine
stand
2.
Screw two (2) Anchor bolts through the stand into the bottom of machine frame on the
inside
of each stand leg
NOTE: Remove the shipping blocks and wire ties from the ends of the
rollers before attempting to raise the top roller!
Alignment bolt
outside stand leg
Anchor bolts
inside stand leg
Alignment bolt
