Gfp 44TH
October 2017
1
Table of Contents
Contents
Page
1.
Introduction …………………………………………………...........................................….2
2.
Important Safety Instructions………………………………………………………………..2
3.
Installation Safeguards …………………………………………………………………........3
4.
General Safeguards…………………………………………………………………….…….4
5.
Operating Conditions …………………………………………………………………….….5
6.
Packing List …………………………………………………………..………….……..……6
7.
Installation
a.
Uncrate the machine ……………..7 f. Attach Upper rewind support brackets….9
b.
Assemble machine stand………....7 g. Attach upper shafts…………………….10
c.
Remove the machine from base….8 h. Attach Safety Shield……………………11
d.
Bolt the machine on the stand……8 i. Attach Print Hold Down Clamp….……..11
e.
Attach rear platform……………...9
8.
System Components ………………………………………………………………….…….12
9.
Control Panel …………………………………………………………………………….....13
10.
Roller Gap Adjustment..……………………………………………………………….……14
11.
Operation.……..….. …………….…………….…………………………………………....14
12.
Loading top supply roll……………………………………………………………………...15
13.
Threading film……………………………………………………………………………….15
14.
Adjusting Brake Tension…………………………..………………………………….……..16
15.
Laminating Cold PSA Film
a.
Single sheets or media from a roll…..…16 b. Single sheets using a sled…...17
16.
Laminating and mounting in one pass
a.
Heat-activated pouch boards…..……....17 b. Thermal film & board…….....18
17.
Laminating Pouches…………………………………………………………………………18
18.
Mounting
a.
Mounting vinyl to boards……..………..19 c. Mounting prints .....……........20
b.
Pre-coating mounting boards…………..19
19.
Heat Sensor Blocked function………………………………………………………..…..….20
20.
Roller Cleaning function…………………………………………………………….……....20
21.
Auto-Sleep function………………………………………………………………….…..….21
22.
Photo safety eye…………………………………………………………………………..….21
23.
Troubleshooting …………………………………………………………………………..…22
24.
Specifications ………………………………………………………………………………..23
25.
Warranty …………………………………………………………………………………..…24
