5
Installing your unit
•
Open the package and remove the protective foam. Remove the
protective sleeve from the unit.
•
Install the Digital Picture Frame stand as the back of the unit.
•
Plug in the AC adapter into power outlet. Plug the other end into the
unit.
•
After the content is stored on the target flash media; insert the media
into the correct slot.
•
Turn power to ON position via the ON/OFF switch.
Connecting to a PC
The Digital Picture Frame has a USB port for connection to a PC (USB Slave)
and a second USB port for connection to other devices such as a Flash Drive,
USB card reader, or a camera (USB Host). When connected to the PC you can
drag-and-drop content from the PC to the internal memory or your memory
card. You can also delete content from the internal memory.
NOTE: USB Slave and USB Host cannot be used at the same time.
