25
Note: After the connection has been established, the name and number of the handset (The next available number,
if less than 4 handsets are already registered) appears in the display.
Note: An unregistered handset will show “
Not Reg
” to indicate that this handset needs registration before use.
De-registering Your Handsets (Removing Handsets from
Your System)
Any handset can be removed from the Base station.
1. Press the
PROG/OK
key.
2. Press # 2 4 5 0 # keys in sequence.
3. Press the
▼
key repeatedly to select the
REGISTRATION
submenu.
1.
Press the
PROG/OK
key.
2.
Press the
▼
key once to
Remove handset.
3.
Press the
PROG/OK
key, then enter the PIN when requested. (Default setting=0000)
4.
Press the
PROG/OK
key
5.
Press
▲
or
▼
key to select a handset
6.
Press the
PROG/OK
key twice to confirm, if the handset being used was selected, the
display shows “
Not Reg
” or else will return to the upper menu and the corresponding
handset display shows “
Not Reg
”.
Answering Machine System Menu and Programming
In idle mode, you can program each of the following options:
Turn Answering System On/Off
Set the Day and Time
Record your outgoing Announcement
Set your Remote Access code
Set ‘Announce Only’ On/Off
Turn audible Message Alert On/Off
Set Base ringer On/Off
Set number of Rings to answer
Set Answering Machine ON/OFF
When you first switch on your phone, the answering machine is in the
ON
mode.
1.
Press Menu key. When you hear the announcement, press or
to switch between the On/Off setting.
2.
Press Menu key to confirm your setting.
Set CLOCK
1.
Press
Menu
key repeatedly until you reach Clock setting option.
2.
Press or
key to program the Day. As you program, the display shows ' d' and a number, 1 to
7,representing the day of the week 1 represents Monday; 2 represents Tuesday, and so on. Press
Menu
key to
confirm.
3.
Press or
key to program the Hour. Be careful that you program pm hour if the current time is
in the afternoon or evening, or an am hour if the current time is after midnight or in the morning. Press
Menu
key to confirm.
4.
Press or
key to program the Minute. You'll be programming the 'tens' column first. Your choices are 0
through 5, as the minutes range from 00 to 59. Press
Menu
. Now, you are programming the 'ones' column,
where your choices are 0 through 9. Press
Menu
key to confirm.
Note: If the mains power to the base is lost, your answer machine will display "St." (Set time) to remind you adjust
the clock when it is switch on.
Outgoing Announcement
You can record 2 different outgoing announcements: A 1 inviting your caller to leave a message (Announce Only
OFF), and A 2 asking your caller to call back later (AnnounceOnly ON ).
