GF JRG Coral force 5000, Installation And Operating Instructions Manual

Page: 31 / 64

Installation
Rev.: 11013802-2 Seite 31 von 64
Variant B: Protection for the hot water installation
Legend:
(1) Water meter + domestic water station; (2) Drain valve; (3) JRG Coral force limescale conditioner; (4) Free outlet
into drain; (5) Flushing line (temperature resistant 80°C); (6) Socket outlet; (7) Optional: integration in to building
routing technology using a signal contact; (8) check valve; (9) pressure relief valve; (10) Heat exchanger; (11) hot
water tank; (12) hot water distriburot with hot water riser; (13) wall mounted mixer tap; (14) cold water
distriburot with cold water riser;
The operating pressure must be at least 2 bar and may not exceed 8 bar . If
necessary, a pressure-reducing valve is to be installed upstream of the device.
The built-in schema does not contain all the shut-off and safety components
required for professional assembly of the device, but only those components
essential for correct installation of the device. Applicable standards, in
particular the DIN 1988 and local installation guidelines, must be observed.