TS 5000 L-E-ISM VPK
Mounting and fixing
GB 7
6.7 Mount sliding lever to fixed leaf and connect with sliding block
In the state of delivery the door edge prevents correct fitting of the sliding lever on the door closer.
The notch in the hexagon of the door closer must be aligned with the sliding lever.
Fig.: 6.7.1
X
Close closing-time valve (
1.
).
X
Set sliding lever in place (
2.
).
X
Turn sliding lever about 45° to position the notch (
3.
).
X
Remove sliding lever (
4.
).
Now the sliding lever can be appropriately attached to the notch.
X
Align and fit sliding lever with notch (
5.
).
X
Fix sliding lever (tightening torque 14 Nm) (
6.
).
X
Connect sliding lever to sliding block (tightening torque 5 Nm) (
7.
).
X
Open closing-time valve again (
8.
).
6.8 Mount sliding lever to moving leaf and connect with sliding block
Mounting of the sliding lever to the moving leaf
occurs in the same manner as with the fixed leaf
(see Section 6.7).
Fig.: 6.8.1
Summary of Contents for TS 5000 L-E-ISM VPK
Page 27: ...TS 5000 L E ISM VPK ...
Page 28: ......
