Powerturn
12
Operation
4.1.2 Selecting the mode of operation at the mechanical programme switch MPS
With the programme switch MPS
X
Turn the rotary switch (22) to the required mode of operation.
The mode of operation is set.
22
Mechanical programme switch MPS
With the programme switch MPS-ST (key switch
Operation of the mechanical programme switch MPS-ST is only
possible with the supplied key (23).
X
Insert the key (23) into the mechanical programme switch MPS-ST.
X
Turn the key rotary switch (24) to the required mode of operation.
The mode of operation is set.
X
Remove the key.
The mechanical programme switch MPS-ST locked.
Mechanical programme switch MPS-ST
with integrated key switch
4.1.3 Selecting the mode of operation using the display programme switch
X
Touch the required mode of operation on the display
programme switch.
The mode of operation is set and indicated on the display (25).
OFF
25
Display programme switch
Fault messages on the display
If a fault occurs in the door system, it is displayed on the display programme switch about every 10 seconds.
X
Read off the number of the fault message, note it down and notify the service technician.
