GEZE IQ box KNX, Commissioning Manual

Page: 3 / 24

GEZE IQ Box KNX
3
1 About this document
The Commissioning manual is a supplement to the addendum of the IQ box KNX. It provides comprehensive
documentation about the commissioning and setting parameters of the GEZE IQ box KNX.
Knowledge of the KNX Bus System and of the KNX ETS software from version 4.0 is required for setting the param-
eters and for integrating the IQ box KNX into a KNX bus system.
1.1 Product description and compatibility
The IQ box KNX makes the control and monitoring of the GEZE IQ windowdrives (Slimchain, Powerchain, E 250 NT,
Power lock, etc.) via the KNX-bus system possible. The drives can be moved to the required positions and the cur-
rent drive position and various drive states can be requested. Two additional binary inputs can be used either for
direct operation (e.g. manual push buttons) or as bus inputs. Configuration is done using the KNX software ETS
(from version 4.0). The ETS product database can be downloaded via the internet from www.geze.com or directly
from www.iq-box-knx.geze.de.
The IQ windowdrives used for operating the IQ box KNX must have software version 3.0 or higher. The SW ver-
sion of the drives is shown on the packaging label and on the identification plate.
1.2 Further documents
à
IQ box KNX leaflet
The leaflet is enclosed with the IQ box KNX and contains the most important product information and instruc-
tions about the electrical connection and about commissioning of the IQ box KNX.
à
IQ windowdrives installation instructions
The installation instructions are enclosed with the IQ windowdrives and contain information about installing
the IQ windowdrives.
à
IQ windowdrives wiring diagram
The wiring diagram is also enclosed with the IQ windowdrives and contains information about the electrical
connection of the IQ windowdrives.
All documents can also be found on the internet at www.geze.com.
1.3 Symbols and illustrations
Warning notices
Warning notices are used in these instructions to warn you of property damage and personal injury.
X
Always read and observe these warning notices.
X
Follow all measures that are labelled with the warning symbol and warning word .
Warning
symbol
Warning word Meaning
ATTENTION
Danger to persons.
Non-compliance can result in death or serious injuries.
CAUTION
Danger to persons.
Non-compliance may lead to minor injuries.
–
CAUTION
Information to prevent property damage, to understand or optimise the operation
sequences.
More symbols and illustrations
Important information and technical notes are highlighted to explain correct operation.
Symbol Meaning
means “important note”
means “additional Information”
X
Symbol for an action: there is something you must do here.
If there are several actions to be taken, keep to the given order.