Parameter setting
GC 342 safety sensor
20
9.2
DIP switches 2–4
1
ON
2 3 4
Parameter
Switch position
ON
OFF
DIP 2
Environment Standard
Critical
Switch to “Critical” if the environment
cause unwanted detections (min.
object size, immunity and uncovered
zones are increased)
DIP 3
Background
On
Off
Switch to “Off” if there is no back-
ground (glass floor, footbridge etc.)
DIP 4
Pinch zone
On *)
Off
Switch to “Off” if no secondary clos-
ing edge safety is required and ob-
jects can cause unwanted detection.
*) If DIP 4 is switched to ON, the input signal SIS on the drive must be set to “SIS REV”.
Carry out a risk analysis to check whether the environment requires additional
mechanical protection in the pinch zone.
Summary of Contents for GC 342
Page 1: ...EN Installation and operating instructions GC 342 safety sensor 167391 03 47 0159 V3 12 19...
Page 9: ...9 Installation GC 342 safety sensor 1 2 2 mm 5 mm 2 PZ2 3...
Page 11: ...11 Installation GC 342 safety sensor DIP ON 1 2 3 4 1 2 6 DIP ON 1 2 3 4 PZ1 1 2 7...
Page 19: ...19 Parameter setting GC 342 safety sensor SIO SIS SIS SIS SIS SIO SIS SIS SIS SIO SIS SIO...