GEZE ECchain 230 V, Wiring Diagram

Page: 14 / 64

Disposal of the window unit ECchain
GB 6
with legal regulations (e.g. in Germany according to MLAR).
X
Before releasing the system for operation, an insulation inspection of the
cable network of the system must be performed and logged.
X
Use only cables prescribed in the wiring diagram. Implement the cable
type, line length and cross-section in accordance with the technical
specifications.
X
Always use wire-end ferrules for wire cores.
X
Insulate unused wires.
2.5 Safety-conscious working and usage
X
Protect the workplace from unauthorised entry.
X
Take care to allow suficient space for the movement of long components
in the system.
X
Before working on the electrical system interrupt the power supply and
verify the safe isolation from supply. Note that the system will still be
supplied with power, despite the fact that the power supply is discon-
nected, if an uninterruptible power supply (UPS) is used.
X
During the setup actuate the drives only in inching mode.
à
Risk of injury when a drive is opened through moving parts (drawing in
of hair, clothing, etc.)
à
Risk of injury by trapping, knocking, shearing and hair etc. being pulled
in at unsecured points.
à Risk of injury through breakage of glass.
à Touching the window unit can result in injuries during operation.
2.6 Checking the mounted system
à
The measures for security and prevention of crushing, impact, shearing
or drawing-in spots, in particular at danger areas of less than 2.5 m
height are to be carried out and checked.
A measure is for example the use of a switch with default off (e.g. GEZE
fan switch LTA-LSA Mat. No. 118476). A key switch with default off must
be used (e.g. GEZE Mat. No. 117996 for SCT, 090176 for cylinder) in places
where there are children or people with limited ability to judge.
X
After the installation has been completed, check that the system is set
correctly and functions correctly and safely.
X
Check all the functions by means of a trial run.
à
The end user has to be instructed in all the important operating and
handling steps after completion.
3 Disposal of the window unit
The window unit consists of materials that have to be recycled. The indivi-
dual components have to be sorted in accordance withtheir material type.
à
Aluminium (profiles)