Heating Water With
Internal Heating System
24. Pour water into the water container. Fill
below the black portion inside and near
the top of the water container.
25. Screw the lid to the top of the water
container.
26. Confirm that the green “LID SECURED”
light is on.
27. Confirm that the blue “LOW WATER WHEN
BLINKING” is off.
28. Confirm that the red “PUMP OFF TOO HOT”
is off.
29. Flip the switch to “HEAT” mode to start
heating your water.
Note:
Heating system will not turn on if
there is not enough water in the container.
30. Confirm that the red “HEATING WATER”
light is on.
31. Wait for approximately 15 to 45 minutes
for water to heat (depending on the initial
temperature and quantity of water). The
heating system will automatically shut off
once the water is approximately 95°F and
the “95 F” light is on.
32. Confirm that the red “95 F” light is on and
the “HEATING WATER” light is off.
33. Confirm the “PUMP OFF TOO HOT” light
is off.
34. Skip to step 38 and start your shower.
Cold shower
35. Pour 3 liters (0.8 gallons) of water into
the water container. Fill below the
black portion near the top of the water
container.
36. Screw the lid to the top of the water
container.
37. Confirm the red “PUMP OFF TOO HOT” light
is off.
9