Gewiss GW 20 827, User Instructions

Page: 38 / 136

38
The function is activated by pressing the MODE key for
an extended period (PARTY function) and then pressing
the MODE key again (HOLIDAY function).
The symbol
is displayed on the VDU.
The keys are used to set the new temperature
set point value. Pressing the MODE key moves on to
setting the number of days of activation, which is dis-
played on the VDU.
This regulation is done using the
keys.
Press the MODE key or wait 5 seconds to confirm the
setting made.
When the function is active it is still possible to modify the set point and the period of ac-
tivation value in the same way as described above. The HOLIDAY function remains active
until the set period elapses. The count of the days is decremented during operation. It is
possible to deactivate the
holiday function at any time, restoring the previous mode, by
pressing the MODE key for an extended period.
To activate manual operating mode the MODE key is
pressed until the message “MAN” is displayed on the
VDU. The temperature set point begins to blink for
about 2 seconds. The
keys are used to set the re-
quired set point value. Press the MODE key or wait 5
seconds to confirm the setting.
The LCD VDU is equipped with backlighting that is active for 5 seconds whenever a key
is pressed. In SET or PROG modes the backlighting remains active during parameter set-
ting and during programming. It is deactivated on exit from these modes.
Party/Holiday function
Manual operation
Visual Display Unit (VDU)
USER INSTRUCTIONS