Gewiss GW 10 793, Manual, Page: 60 / 164

INSTALLATION INSTRUCTIONS
60
UP UP
WARNING: the installation of the device must be exclusively done by
qualified personnel, following the regulations in force and the
guidelines for KNX/EIB installations.
In order for the thermostat to take
correct readings of the ambient
temperature, it must not be installed
in an alcove, near a door or window,
next to radiators or air conditioner
units and must not be placed in
direct sunlight or in draughty areas.
The support base should be positioned at 160 cm from the ground and can be mounted
on the wall, using dowels, or on top of a 2-place round or square box (60 mm hole
distance).
Mounting with dowels
Correct installation position
Assembly of the support base