Gewiss GW 10 793, Manual, Page: 46 / 164

To scroll the sequence, confirming the values displayed on the screen, press the key
until you reach the parameter you want to change.
Press the SET key again to exit the parameter setting procedure or it will exit
automatically after a 30" time-out.
It is necessary to perform both sequences to set the heating and air-conditioning
parameters (in the second sequence it is possible to confirm the parameters which are
the same, and just change the specific ones).
Selecting heating/air conditioning
When the or symbol blinks it is possible to select
the operating type using the keys .
Press the key within 30 seconds to confirm the
selection.
Setting the day of the week
When the day of week bar is blinking, select the current day
using the
keys.
(Monday=1, Tuesday=2 ... Sunday=7).
Press the key within 30 seconds to confirm the value
set.
Setting the hour
When the hour figures blink, set the time using the keys
.
Press the key within 30 seconds to confirm the value
set.
Setting the minutes
When the minutes figures blink, set the minutes using the
keys
.
Press the key within 30 seconds to confirm the value
set.
OPERATING INSTRUCTIONS
46