Gewiss GW 10 761, Manual

Page: 66 / 172

4. Insert the bus connector into the special feet of the device. The fastener guides
determine the direction it should be inserted.
1. Power up the device using the bus and wait for 5 seconds until it is in full operating
mode
2. Have the system acquire the device with one of the following procedures:
• Automatic acquisition (the device still has the factory settings):
- select the “Application → New function” or “Application → Edit function” menu in
the Easy base unit: the device will be recognized automatically.
• Manual acquisition (the factory settings have been modified):
- select the “Application → Search device” menu in the Easy base unit;
- briefly press (< 2 seconds) the programming key. The programming LED will light
up during the acquisition process.
The device acquired by the Easy base unit will be listed, with the number assigned, in the
channels of the “Application
→ New function” or “Application → Edit function” menus.
INSTALLATION INSTRUCTIONS
66
Programming LED Programming key
Initialization with the Easy base unit