INSTALLATION
20
1. Power up the device through the bus.
2. Have the system acquire the device with one of the following procedures:
•
Automatic acquisition
(the device still has the factory settings):
- select the “Application
→
New function” or “Application
→
Edit function” menu in
the Easy base unit: the device will be recognized automatically.
•
Manual acquisition
(the factory settings have been modified):
- select the “Application
→
Search device” menu in the Easy base unit;
- briefly press (< 2 seconds) the programming key. The programming LED will light
up during the acquisition process (figure
A
).
The device acquired by the Easy base unit will be listed, with the number assigned, in the
channels of the “Application
→
New function” or “Application
→
Edit function” menus.
Use a screwdriver to raise the removable slides on the side of the buttons (figure
I
) and
place the labels with the functions icons to clearly identify each button function. Replace
the slides.
Insert the device into a Chorus support, making sure the rear programming LED is at the
bottom.
Complete the installation with other Chorus devices or covers and fix it to the relative
container (flush-mounted box, wall-mounted box etc). Apply the finish plate.
Initialization with the Easy base unit
Completing installation