Chorus Digital Vision - Technical System Manual
66
CONFIGURATION
Orientating the telecamera of the audio/video module for front door unit
To orientate the telecamera, so that it perfectly frames the call area, proceed as follows:
1. Remove the module frame by lightly pressing with a small flat-head screwdriver on the 4 clip fastener teeth. Put the frame to one
side, along with any transparent name-holder plate.
2. Use the friction-based traverse mechanism (to the right of the lens) to adjust the orientation of the telecamera, i.e. traverse its height
and direction. To do this, insert a screwdriver in the cross-shaped notch of the mechanism.
ATTENTION:
do not rotate the mechanism - just move it up/down and right/left. Do not force the mechanism beyond its
stopping points.
3. Reinsert the module frame and any transparent name-holder plate previously removed.
Adjustments and calibrations
`
1
2
Summary of Contents for Chorus Digital Vision
Page 1: ...Video Entryphone Technical Manual ...
Page 103: ......