User Manual IR-3SP Micro Jack
5
3.0
Tip! IR-3SP can record codes from most IR transmitters on the market with a
few exceptions. You may have problems with a few or all of the functions for a
certain IR transmitter. In these cases it is possible to use another recording
method. Instead, do as follows in step 2; Press the programming button and the
function button (A) at the same time but keep them pressed for approximately 2
seconds. IR-3SP is now in another recording mode. Otherwise use the same
recording procedure.
Mounting
IR-3SP can be used hanging on a strap around the neck. Remove the string lock
from the neck strap and pass the neck strap through the attachment loop on the
transmitter. Replace the string lock and adjust the length of the neck strap.
Warning!
The string lock is a safety detail for the prevention of strangling. Check that the
neck strap ends can easily be drawn out if the transmitter gets caught on
something. Never make knots on the neck strap!
IR-3SP can also be equipped with clips (article number 401130) which make it
possible to attach it to a belt or pocket. Clips can be obtained from Gewa AB or
a Gewa retailer.