20
SWITCHING ON
FUNCTION MENU
5.5.2
CHANGING METRONOME SPEED
1. Switch on the metronome.
2. Press the upper or lower cursor keys to increase or decrease the speed in steps of
10 or push the left or right cursor key, to increase or reduce the speed in single steps.
The selected beat and/or speed shows in the display.
5.5.3
BEAT TYPE CHANGES
1. Hold the metronome button depressed. The beat will be displayed.
2. Press the right or left cursor button to choose a beat.
3. Release the metronome button. The selected beat is now ready to play.
5.5.4
SETTING METRONOME VOLUME
1. Hold the metronome button depressed. The beat will be displayed.
2. Press the upper or lower cursor buttons to set the volume of the metronome.
3. Release the metronome button. The selected metronome volume will now be displayed.
6
FUNCTION MENU
All the edited settings are reset to factory settings when the digital piano is switched off
and back on again. In the function menu you can change numerous settings. To enter the
function menu, press the Reverb and Chorus button simultaneously.
Navigation within the Function menu:
1. Push the Reverb and Chorus button simultaneously. In the display the abbreviation of
the relevant setting will blink alternating with the momentary setting.
2. Press the left or right cursor button to change from setting to setting.
3. Press the upper or lower cursor button to change the settings properties. Changes of
the properties become effective immediately.
4. Press the Reverb key to leave the menu.
NOTE
Summary of Contents for DP 220 G
Page 31: ...31 NOTES ...
