10
ASSEMBLY INSTRUCTIONS
3
ASSEMBLY INSTRUCTIONS
In this section we will show you how to easily set up your GEWA digital piano.
For the assembly you need:
• size 2 Phillips screwdriver
• second assisting person
Do not firmly tighten the recessed head screws until all parts of your digital piano are
aligned. Make sure you assemble your digital piano on level ground.
Now lets start assembling your GEWA digital piano:
1. Release and unfold the wound up pedal cable (without illustration).
2. By using the recessed head screws M6 (10), connect the side panels (6 and 7)
with the pedal board (4).
3. Apply the bracing of the pedal board (3) to the backside of the pedal board so that it
snaps into the notch. Then screw it on using 4 recessed head screws.
4. Now screw on the bracing on to the back rear panel (2) with 4 recessed head screws.
5. Insert the console from above and flush mount it with the front edge. The console must
lie flat on the screwed-on brackets for stability reasons. Then screw on the console (1)
with 4 recessed head screws. You can now screw on the headphone rest on the left
front bottom side of the digital piano.
6. Level your digital piano and tighten all recessed head screws (6).
7. Place the plastic covers on all side panel boreholes (6 and 7).
NOTE
Summary of Contents for DP 220 G
Page 31: ...31 NOTES ...
