background image

8

W

ARRA

n

Ty

>

  Due to theft or loss. 

>

  For damage caused by natural causes beyond the control of GV2.

This limited warranty is in lieu of all other expressed warranties, 

obligations and liabilities. GV2 USA Company Ltd. limits the 

duration of any implied warranty, including the implied warranty 

of merchantability or fitness for a particular purpose to two (2) 

years from the date of original purchase. GV2 USA Company 

Ltd. disclaims liability for incidental or consequential damages for 

breach of any express or implied warranty, including warranty of 

merchantability or fitness for a particular purpose with respect to 

this watch.

HOW TO OBTAIN SERVICE UNDER WARRANTy

This warranty is guaranteed for a period of two (2) years from the 

date of purchase, only if the watch is purchased from and signed by 

the retailer named on the official warranty card or by providing the 

original retail purchase receipt. 

To obtain service, the watch must be accompanied by either a 

completed copy of the warranty card or the original retail purchase 

receipt. If work is done under the warranty, the GV2 dealer or the 

Summary of Contents for GV2 Series























































Reviews: