background image

8.

 

To re-set the Auto Brew time to the same pre-set time for the next day, simply press the 
AUTO ON button. The green Indicator Light encircling the button will illuminate and the 
word AUTO will again be displayed in the upper right hand corner of the LCD digital 
clock/display.  

 

PAUSE & SERVE 
 

Allows  you  to  interrupt  the  brewing  cycle  and  pour  a  cup  of  coffee  before  the  entire  Carafe  is 
finished brewing.  
 

CAUTION:  While  this  will  temporarily  stop  the  coffee  from  dripping  into  the  Carafe,  it 
does not stop the brewing cycle. After serving, the Carafe should be  immediately returned 
to the Warming Plate to prevent the Filter Basket from overflowing.  Make sure the Carafe 
and Filter Basket are positioned firmly against the back of the Coffee Maker. 

 

NOTE:

  While  the  pause  and  serve  is  a  convenient  way  to  pour  a  cup  of  coffee  mid-cycle,  we 

recommend you wait until the completion of the brew cycle as the strength  and flavor of coffee 
poured mid-cycle will vary from the finished brew.  

 

 

CLEANING YOUR COFFEE MAKER

 

1.

 

Always unplug the Coffee Maker and allow the unit to cool before cleaning.  

 
2.

 

Wash the Carafe/Carafe Lid and removable Filter Basket in hot, sudsy water. DO NOT place 
any parts of your Coffee Maker in the dishwasher.  

 

3.

 

Never  use  harsh  or  abrasive  cleansers  on  any  part  of  your  Coffee  Maker.  To  clean,  simply 
wipe off with a soft, damp cloth. The Warming Plate may be wiped with a clean, damp cloth 
when  necessary.  For  hard  to  remove  stains,  use  a  plastic  mesh  pad  or  cloth  dampened  in 
vinegar.  
 
IMPORTANT:  Never  immerse  the  Warming  Plate  or  main  housing  in  water  or  any  other 
liquid. Do not try to clean the inside of the Water Reservoir with a cloth, as this will leave a 
residue of lint and may clog your Coffee Maker. Just rinse with cold water periodically.  

 

 

DECALCIFYING YOUR COFFEE MAKER

 

 

Calcium  build-up  frequently  occurs  in  drip  Coffee  Makers.  This  build-up  is  normal  and  is 
caused by minerals commonly found in drinking water. Periodically, your Coffee Maker will 
need  cleaning  to  remove  calcium  or  mineral  deposits  that  may  form.  You  will  know  when 
your unit will need decalcifying when you notice an obvious slow down in brewing time. We 
recommend decalcifying your unit with Gevalia Cleancaf® Cleaner & Descaler or a solution 
of white vinegar and cold water. Nontoxic, biodegradable and odorless Cleancaf® is a quick 
and easy way to keep Coffee Makers clean, fresh and odor free. Use bi-monthly to remove or 
prevent  oil  residue  and  mineral  buildup.  You  can  order  Cleancaf®  by  calling  1-800-
GEVALIA (1-800-438-2542) or visiting us at www.gevalia.com. 
 

Summary of Contents for CM-22 Series











Reviews: