Geutebruck 0.60200, Installation Manual, Page: 22 / 25

Working with the G-ST 2000+
21
V 1.0

Serial port COM1 and COM2
At the COM1/COM2 port, there is a an RS-232 interface via 9-pin Sub-D sock-
ets RS-232.
Figure: COM1 and COM2
The 9-pin COM plugs are assigned by default as follows:
Figure: Pin assignment for COM connection – solder-side socket
Pin Function Pin Function Pin Function
1 JDCD 4 DTR 7 RTS
2 RxD 5 Signal ground (GND) 8 CTS
3 TxD 6 DSR 9 RI
Turning off the device
Turn off your G-ST in the following order :
1. Close all applications and click Start in the taskbar .
2. Select shut down computer and press OK .
The operating system will now shut down and all data will be stored .
3. Then fully switch off your device by pressing the on/off button or by disconnect-
ing it from the power supply .