Geutebruck 0.60200, Installation Manual, Page: 19 / 25

Working with the G-ST 2000+
18
V 1.0
Digital outputs
Each unit has 4 floating digital outputs. Like the digital inputs, these are distributed
onto the two 25-pin sub-D socket (relay 1-4).
Using the digital outputs, you can switch external devices, for example, to report sys-
tem errors. The respective events are created and set up accordingly in the G-Set
configuration software.
Assignment of 25-pin Sub-D connectors
The contacts can be soldered directly to the corresponding Sub-D plug. The assign-
ment of the 25-pin Sub-D connectors is shown in the following figure.
Figure: Assignment of the 25-pin Sub-D socket, solder-side
Connection
Signal Socket 1
13 Normally open contact
25 Normally closed contact
Relay 4
12 Changeover contact
24 Normally open contact
11 Normally closed contact Relay 3
23 Changeover contact
10
Normally open contact
22 Normally closed contact
Relay 2
9 Changeover contact
21 Normally open contact
8 Normally closed contact
Relay 1
20 Changeover contact
7 Ground
19 Switch input 8
6 Switch input 7
18
Ground
5 Switch input 6
17 Switch input 5
4 Ground
16
Switch input 4
3 Switch input 3
15
Ground
2 Switch input 2
14 Switch input 1
1
Ground
Normally open
contact
Normally
closed con-
tact
Changeo-
ver con-
tact