LoFi Delay PT2399
BEFORE YOU BEGIN
SAFETY IS YOUR RESPONSIBILITY.
Make sure that all the components are included.
Always work in a well lit and ventilated area.
Wash hands after handling solder and components.
Use only proper tools.
Returns only accepted for unopened kits.
Send us an email at [email protected] with any problems or questions.
Tools Needed for Basic Kit Assembly
25 watt or less soldering iron with a fine tip.
60-40 Flux-Core from Radio Shack or equivalent DO NOT USE ACID CORE or SELF CLEANING solder.
Wire Cutter for cutting long legs of components close to circuit board.
Wire Stripper for exposing the metal core of the insulated wire.
Third Hand or other assembly with a clip to hold the circuit board while soldering.
Copyright GetLoFi, LLC 2012
Page 1 of 7
4/29/2013
Created:
