Getinge S-606 Operating Instruction Download Page 4

Operating instructions

4

Version 990426

5000376-00

Safety regulations

The design of this machine incorporates a number of built-in safety devices.
To avoid personal injury, it is very important not to render these safety
devices ineffective by by-passing them.

General safety rules

• The machine shall be connected in accordance with the installation

instructions.

• The machine shall not be operated by minors.

• Installation and service operations shall be performed by personnel with

the appropriate training for this machine.

• The machine's lid lock shall not be by-passed under any circumstances.

• Leakage in the system, e.g. a worn lid seal, shall be repaired immediately.

• Before performing any repair or service operations, the personnel

concerned shall study the relevant handbooks and service manuals.

• The machine must not be washed down with water.

•  Care shall be taken when using corrosive detergents.

• Safety precautions in the presence of hot water and steam.

Isolating device

The machine shall always be provided with a separate isolating device in the
mains power supply mounted in a readily accessible position on a wall.

Description

The wash disinfector is intended for the cleaning and disinfection of re-usable
items such as basins, hand bowls and urinals. Disinfection in this context
means the destruction of all vegetative bacteria, fungal spores and viruses, but
not bacterial spores.

Warning symbols

This handbook contains various warnings, directions and advice of such
importance that we have decided to mark them specially. The following
layout and symbols are used:

This symbol marks a warning in the handbook text. Failure to heed this
warning can lead to more or less severe personal injury and, in some
cases, danger to life.

The symbol also marks warnings intended to prevent damage to the
appliance

Summary of Contents for S-606

















Reviews: