Getinge S-606 Operating Instruction Download Page 14

Operating instructions

14

Version 990426

5000376-00

Economy programme

If the items to be cleaned only contain liquids, or if they
are only lightly soiled, the economy programme can be
used. The water consumption is a good deal less in this
programme, but disinfection is the same as for the normal
programme.

Press the 

t

 button for a urinal. The cleaning

programme now starts. The following cycles are perfor-
med:

01. Cleaning

The item is cleaned effectively during this cycle.

02. Disinfecting

The washing chamber is heated with steam until the
right disinfection temperature and the right time are
achieved.

03. Cooling

The items are cooled with water (it is possible to
delete the cooling phase if the machine is pre-
programmed).

When the machine is run without cooling, the
machine will give a 

HOT ITEMS 

warning after the

process is complete.

END OF PROGRAMME

The green indicator lamp for 

M

 lights when the

programme has finished. The door is unlocked
automatically. Open the door and remove the clean,
disinfected items from the machine. The maximum
disinfection temperature appears in the display. The
green lamp goes out when the door is opened.

100

80

60

40

20

C

°

01

02

03

V566

Phase

Summary of Contents for S-606

















Reviews: