001-14154-33-EN rev. 2
8 of 8
2.8 2 or 4-Function Programming
This function allows for the configuration of the circuit board from 4-function to 2-function
(without powered lateral movement). This function deactivates all functions related to
the unit’s powered lateral movement (LEFT, RIGHT, FIDO, RETURN TO CHARGE)
A) Enter the Technical Service Mode and select the seventh choice (consult section 2).
B)
Use the LEFT button to select the number of functions desired. Each push on the button allows you to
go from one selection to the next. Refer to the NUMBER OF FUNCTIONS chart below
:
LIFT MODELS
NUMBER OF FUNCTIONS
All Models
1 beep*
2 beeps
3 beeps
4 beeps
4
4
2
4
* Default setting from factory
C) To confirm your selection, press the PROG button.
D) Now you can choose a new selection by pressing on the UP button on the hand control. To return to
normal use, turn off the lift and turn it back on.
