and safety instructions for your Greiner Engineering Tools equipment must be followed to
enable this warranty.
Unit should be operated only from the power source indicated in this documentation or
on the product itself. Do not install or operate this product near water or moisture. This
product should be situated away from sources of heat. Sum.mation is supplied with an
IEC grounded power cable & plug. This plug must be plugged into an outlet that is
properly installed and grounded in accordance with all local rules and ordinances. Do not
modify the plug provided with the equipment. If the plug will not fit into your outlet,
have a proper outlet installed by a qualified electrician.
Several options can be internally selected, however opening the chassis of this product
will expose you to hazardous voltages. If you are unsure of how to perform these internal
changes, please refer service to a qualified professional.
To take advantage of the warranty and product upgrades, please register your product
online via the contact page at:
http://www.greinerengineering.com/contact
Enter your name, address and your sum.mation serial number in the message window.
RoHS Notice
Greiner Engineering Tools LLC has conformed and this product conforms, where
applicable, to the European Union’s Directive 2002/95/EC on Restrictions of Hazardous
Substances (RoHS) as well as the following sections of California law which refer to RoHS,
namely sections 25214.10, 25214.10.2, and 58012, Health and Safety Code; Section
42475.2, Public Resources Code.
FCC Statements
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
