Operation
CONTROL PANEL
CONTROLS
IMPORTANT:-
Ensure that the draining bungs are firmly in place in the drain ports and
that the air outlet (on the top of the unit) is open, before operating the
machine.
ON / OFF Switch
This switch is used when there is a need to temporarily switch the machine ON or OFF.
When the machine is switched on using this button, the running mode and fan speed mode
will be set to auto.
Pressing this button again will stop the machine.
When the plug is first plugged into a socket the machine will bleep and go into stand-by
mode. Pressing the “ON/OFF” button will turn the machine on. Pressing the “ON/OFF”
button again will put the machine back into stand-by mode.
Note:- After switching the unit off, wait 3 minutes before switching it on again.
Water Full Indicator
This LED will illuminate when the water tank within the machine is full and the machine will
stop
.
If after draining the tank, the warning light remains on, this could indicate that there
may be a fault with the machine. If this is the case, do not attempt to operate the machine
and call the service number.
Mode Indicator
Note:- Modes are selected by means of the remote controller.
a) When COOLING MODE is selected, the “
” symbol will be illuminated in the display
panel.
b) When DEHUMIDIFYING MODE is selected, the “ ” symbol will be illuminated in the
display panel.
c) When FAN MODE is selected, the “
” symbol will be illuminated in the display
panel.
d) When AUTO MODE is selected, the “
AUTO
” symbol will be illuminated in the display
panel.
