Select a suitable location for the unit
•
The unit should be positioned beside a window or door to allow the vent hose to
reach outside the room.
•
The air intake should be a minimum distance of 10cm from any object.
•
Do not install the unit underneath desks or inside cupboards as this will restrict the
operating air flow.
•
Ensure that there are no obstructions to the air intake or air outlet.
•
Ensure that the air intake is not being blocked by curtains, or similar objects.
•
The end of the vent hose should not be blocked by a shutter or similar device.
•
When fitting the vent hose it should be kept as straight as possible.
Permanent installation
If it is required to vent the unit permanently through an outside wall, it is recommended that
use is made of the separately available wall venting kit (details available from the Helpline)
which also contains an external grille and hose to pass through the wall.
1) Make a suitable size hole through the external wall to accept the hose in the wall
venting kit.
2) Secure the flexible ducting in the wall venting kit to the wall fitting using cable ties.
3) Pass the flexible ducting through the hole in the wall from the inside.
4) Fix the wall fitting to the surface of the internal wall using suitable wall plugs and
fixing screws.
5) Attach the external grille to the other end of the flexible ducting using cable ties and
fix to the outside wall using suitable wall plugs and fixing screws.
6) Attach one end of the vent hose to the exhaust air outlet of the air conditioner.
7) Attach the end fitting from the wall fitting kit to the other end of the vent hose and fit it
into the wall fitting.
8) When not in use, cover the hole with the wall fitting cap.
