Operation – cont’d
REMOTE CONTROLLER
BATTERY POSITIONS
Fit the batteries into the remote controller as shown above.
The remote controller can be used to switch the unit on and off up to a range of 10 metres
and is used to select the various modes and set the temperature or timer.
Note:- It is necessary for the remote controller to have a direct un-obstructed “line of sight”
with the front of the machine. If it is found that the remote controller does not always operate
the machine within the 10 metre range, this is an indication that the batteries may require
replacement. Replace with 2 new 1.5V, Size AAA batteries.
Dispose of the old batteries carefully - Do not expose to heat or fire.
Function of Buttons on Remote Controller
ON / OFF Button
This button is used to switch the machine on and off.
MODE
This button is used to select the modes as follows:-
Cooling Mode (LED illuminates Blue)
In this mode the air is cooled and hot air is exhausted through the vent hose to outside the
room. Fan speed and temperature can be adjusted to suit the comfort level required by
means of the appropriate buttons on the remote controller.
Dehumidifying Mode (LED illuminates Orange)
Air is dehumidified as it passes through the air conditioner and the damp warm air should be
exhausted by means of the vent hose. If the room temperature is greater than 25°C, the fan
speed can be adjusted, otherwise the fan speed is fixed at low speed.
Note:- The warm air from the exhaust hose must be vented into the room when using
Dehumidifying mode and not outside the room as in cooling mode. If the unit is vented
outside the room some cooling will occur.
Bve
Bve
Battery Compartment Lid
