8
START OF THE CHARGE
1
Once the battery output conductor cables are connected,
connect the device power cable to the power outlet,
ensuring that the voltage corresponds to the nominal one
of the battery charger
2
Pb Lithium
With the battery charger in “stand-by” mode (LED ON
illuminated), select the type of battery to charge by means of
the key “Type of Battery Selector”.
Configurable charge parameters
Pb
Charge for 12V batteries from 2Ah to 40Ah
Maintenance for 12V batteries from 2Ah to 100Ah
Recommended for Pb batteries: WET – GEL – AGM
Lithium
Charge for 12V batteries from 2Ah to 40Ah
Maintenance for 12V batteries from 2Ah to 100Ah
Recommended for LiFePO4 lithium batteries.
ATTENTION: do not charge other types of lithium batteries
3
START
Press the key START to start the charge.
Charge messages:
CHARGING
Battery status analysis
CHARGING
Battery under charge
FULL
The battery is 100% loaded and from now on the battery charger
will go into the maintenance phase and the battery efficiency
status will be constantly monitored, ensuring at the same time
that the battery is always kept at an optimal charge level.
EN