9
Storing and transporting the
equipment
Attention!
Storing or transporting the equipment
incorrectly can damage it.
➢
Seal off all openings with the supplied
covers, or comparable ones.
➢
Make sure the equipment remains
dry and is protected against corrosive
atmospheres.
➢
Please contact the manufacturer if
you wish to transport or store the
equipment in different conditions.
Storing the equipment
➢
Store the equipment solely in the following
conditions:
◗
Store the equipment for no more than
12 months.
◗
Seal off all openings on the equipment with
the supplied plugs or comparable covers.
◗
Connecting and sealing surfaces must be
protected against mechanical
damage.
◗
The equipment and all components must be
protected against jolts and impacts.
◗
Only store the equipment in closed rooms in
the following ambient conditions:
◗
Air humidity below 50%, non-condensing
◗
Clean room air, not salty or corrosive in
other ways
◗
Temperature 5–40 °C.
➢
Make sure that these conditions are constant-
ly maintained throughout storage.
➢
Please contact the manufacturer if you wish
to store the equipment in different conditions.
Application of European
Directives
Pressure Equipment Directive
The equipment conforms to this directive (see
“Manufacturer's Declaration” section) and can be
used for the following fluids:
◗
Group 2 fluids
ATEX Directive
The equipment does not have a potential ignition
source and as such is not subject to this directive
(see “Manufacturer's Declaration” section).
Static electricity: Static electricity can be pro-
duced in the system if the equipment is installed
between pipe flanges.
If the equipment is used in potentially explosive
atmospheres, the discharge or prevention of pos-
sible electrostatic charging is the responsibility of
the manufacturer or operator of the system.
