Gestetner P7126 Printing Manual Download Page 53

Page: 53 / 75

4. Windows NT 4.0

Configuration

Configuring Windows NT 4.0

Printing without a Print Server

The following procedure describes how to configure Windows NT 4.0 to use the
machine on a network without a Windows 2000, Windows NT Server, Windows
NT Workstation or NetWare based print server.

AAAA

Specify the protocol to use

Consult your network administrator about which of the three protocols is ap-
propriate.
• TCP/IP
• IPP
• NetBEUI

BBBB

Configure the chosen protocol.

• See p.38 “Configuring TCP/IP and IPP for Printing”.
• See p.39 “Configuring NetBEUI for Printing”.

CCCC

Install the software and set the printer driver port

• Install SmartNetMonitor for Client from the CD-ROM labeled "Printer

Drivers and Utilities". For more information about how to install the soft-
ware and how to specify the printer driver port, see the Setup Guide.

Printing with a LPR Port

See p.46 “Configuring LPR Port Printing” for how to configure a LPR port in
Windows NT 4.0.

Printing with a Windows 2000 or Windows NT Print Server

See p.47 “Setting Up a Client Computer” for configuring Windows NT 4.0 with
a Windows 2000 or Windows NT print server.

Summary of Contents for P7126












































































Search results

Summary of Contents for P7126

Reviews:

Related manuals for P7126

Brands by name

Popular brands

Gestetner P7126, Printing Manual

Search results

Summary of Contents for P7126

Reviews:

Related manuals for P7126

Brands by name

Popular brands