Gestetner DSm635, Fax Manual

Page: 75 / 102

Using Key Operator Settings
181
9
Note
r
If you make a mistake, press
[ Clear ] or the
{
Clear/Stop
}
key.
F
Press [ Delete ] .
Note
r
To cancel deleting a special
sender, press
[ Do not Delete ] . The
display returns to that of step
E
.
G
Press [ Exit ] .
H
Press the
{
User Tools/Counter
}
key.
The standby display appears.
Printing the Box List
Follow the procedure below to print a
list showing the currently pro-
grammed Personal Boxes, Informa-
tion Boxes, and Transfer Boxes.
A
Press the
{
User Tools/Counter
}
key.
B
Press [ Facsimile Features ] .
C
Press [ Key Operator Tools ] .
D
Press [ Print List ] next to “Box Set-
ting”.
E
Press the
{
Start
}
key.
After printing the list, you can then
start from step
D
.
Note
r
To cancel printing a list before
pressing the
{
Start
}
key, press
[ Cancel ]
or the
{
Clear/Stop
}
key.
The display returns to that of
step
D
.
r
To cancel printing a list after
pressing the
{
Start
}
key, press
[ Stop Printing ] . The display re-
turns to that of step
D
.
F
Press the
{
User Tools/Counter
}
key.
The standby display appears.
Transfer Report
For the Requesting Party to be able to
receive Transfer Result Reports from
the Transfer Station, the Requesting
Party must program the number of
the telephone line in connection on
their own machine. See p.52 “Trans-
fer Request”.
Be sure to insert a pause after the area
code.
For example, if you are in the United
States and your fax number is 212-
1234567, program the following:
• 1212-1234567
You can program the fax number for
the G3 line.
Limitation
r
You cannot program or edit a
Transfer Report when using a line
(during communication). Program
or edit after communication.
Note
r
You cannot use Transfer Request if
the telephone number of their ma-
chine is not programmed into that
machine.
r
Up to 16 digits are available for G3.
A
Press the
{
User Tools/Counter
}
key.