2
Introduction
The Gesswein Power Hand 3 M-35X Rotary Motor is engineered and
manufactured to a high degree of precision and will give you many years
of trouble-free service. Backed by a limited warranty that covers wear parts
for 90 days and overall balance of parts for six months.
This DC electrically driven rotary motor is designed to be used with the
Power Hand 3 Controller (#510-3300). For use with Gesswein Power Hand 2X
controllers, the PH3 adaptor (#510-3304) is necessary to connect the
5 prong motor plug to the 3 prong controller receptacle. Controllers convert
the Alternating Current (AC) power supply to a variable Direct Current (DC)
by means of an I.C. “transistorized” automatically controlled circuit.
The Gesswein Power Hand 3 rotary motor series consists of six motors
and eight head assemblies with maximum operating speeds ranging from
8,000 to 55,000rpm. The maximum RPM speed is indicated on each motor
case housing.
To connect Power Hand 3 handpieces to Power
Hand 2X controllers, use the PH3 Adaptor 5 to 3
prong reducer plug. #510-3304.
3
Accessories
Included Accessories
A. Two Carbon Brushes (reorder #510-0169)
Optional Accessories
A. Handpiece Extension Cord (#510-3380): adds 9 feet, or almost 3 meters,
to the rotary handpiece cord
B. Handpiece Cradle Rest (#510-1130): provides a safe holding place
for the rotary handpiece when not in use
C. PH3 Variable-Speed Foot Rheostat (#510-3306)
D. 3mm Collet (#501-0106)
E. Reducing Collets:
1
⁄
8
" to
3
⁄
32
" (#816-1501),
1
⁄
8
" to
1
⁄
16
" (#816-1502),
3
⁄
32
" to
1
⁄
16
" (#816-1503), 3mm to
3
⁄
32
" (#816-1504), 3mm to
1
⁄
16
" (#816-1505)
Parts Nomenclature
1. Test Rod
2. Collet
3. Head Cover
4. Collet Release Ring
5. Motor Connecting Ring
6. Motor Housin g
7. Motor Cover
8. Motor Cord with 5-prong plug
9. On/Off Switch
Fig. 1
1
3
4
2
6
7
8
5
9
