GESS SYMPHONIE, Manual, Page: 77 / 80

76 Analysis of machine problems
Attention
If problems all are not from above reasons, please stop power supply and
contact with the distributor or factory for maintenance.
Phenomenon Possible cause Processing method
Do not open the power switch
Have not choose massage
function
Bad connect between plug and
socket
Have broken on power wire or
plug
The fuse burned up
A fault in the controlling circuit
Sounds from air pump, motor or
other mechanical parts
Rollers under alternately work
If after long time works
Cause from long time work
If there is bad power cconnection
Auto programmed time is up
Obstructer there; work overload-
ed automatically stopped work
for protecting machine
Problem on electromotion pole
or plug-ins under bad connection
Cause from long time work
Work overloadingly
Causes from other reasons
Can not work after
supplied power
Working with
tap-tap-tap or hum
sounds
Different hight for the
massage rollers
Abnormal soundssud-
denly occurred while
working
Suddenly stopped
working
Can not recline
Can not restore after
reclined
Control panel
overheat seriously
Abnormal overheat
from power wire and
plug
Switch on
Press on massage function
Connect again
Please request the manufacturer or
service man to replace new power
line.
Replace it by a fuse with same
specifications
Contact with the maintenance
department of supplier
Normal phenomenon
Normal phenomenon
Cut down the power and check
after 30 minutes
Contact with the maintenance
worker
Supply power again
Cut down the power and use after
30 minutes
To move the obstructer; stop work
and use after 30 minutes
Contact with the maintenance
worker
Cut down the power and call the
maintenance worker
Cut down the power and use after
30 minutes
Cut down the power and call the
maintenance worker